Q-See QSDT16PCRC - Manual (Page 37)

72 73
CHA
PTER
9 REMOTE SUR
VEILLANCE & PLA
YBACK
PICTURE 9-46
PICTURE 9-47
Return to previous main interface
Multiple Channels playback control
The system default playback modes
are single and four channel. If you need
to change to other channels, then click
the single channel button to bring up the
1-channel configuration window where you
can select one channel from all the available
channels for playing back.
The four channel configuration window
will display when the four channel icon
is selected allowing you to select any four
channels from all the available channels for
play back.
The data preview area at the center gives details of the recorded files. Different colors of the
bar show different types of records.
Data preview shows the recorded data for different channels during corresponding time, the
left side shows the available channels. When a certain channel has been selected for playing
back, the background color will be highlighted, or its dark gray and a tick sign will appear
beside the channel title.
PICTURE 9-48
BLUE Manually Recorded GREEN Schedule Recorded
YELLOW Motion Detection RED Sensor Alarm
The ruler on top of the bar shows the hours of the day. Right-click the ruler, it will be magnified
10 times allowing users to see the time marks more clearly.
When searching for a certain section of a record, draw the bar to the desired position. If
necessary, right-click the bar to see the magnified time marks for precise search.
You can click the Play button to play the selected record, Then return to live display mode after
finishing remote playback, it will display a message ‘Connecting…’on the screen. And you
may click “Large Picture” or “Quad Picture” button to refresh the screen to get live picture.
PICTURE 9-45
Right-clicking the mouse in the search area
will open a sub menu.
If you want to view all channels, click Select all, then all check boxes before channels will be
selected.
Click Clear all to clear all selected channels; if users select a certain channel, click Select this
channel, then just this channel be selected.
Click Clear this channel to deselect that channel.