Q-See QSDT16PCRC - Manual (Page 11)

20 21
CHAPTER 4
INST
ALLING THE SUPERDVR SOFTW
ARE
INSTALLING THE SUPERDVR
SOFTWARE
CHAPTER 4
4.1 INSTALLING THE SOFTWARE
You will be controlling your security system using the SuperDVR software. It is compatible with
Windows 2000, XP, and both the 32 bit and 64 bit versions of Vista and Windows 7.
The SuperDVR software is included on the disk that comes packaged with your DVR card. It
can also be downloaded from our website at www.Q-See.com by simply searching for your
product and going to the Downloads section.
STEP 1. The software can be installed
from the CD by selecting the
appropriate button in the CD’s menu,
by copying the installer to your hard
drive and then double clicking to
begin the process.
STEP 2. Once the Setup window opens,
click Next to begin the installation.
STEP 3. Select your video format. NTSC
is the standard in North America.
Click next to continue.
STEP 4. Instruct the installer where you
want the software to be placed. Either
use the default location or select your
own. Click Next to continue.
STEP 5. Once the installation has
completed, you will be asked to press
the Finish button.
As part of the installation process, a shortcut
to the SuperDVR software will be placed on
your desktop.
You will need to restart your computer before
you can launch SuperDVR and begin setting
up your surveillance system.
PICTURE 4-1
PICTURE 4-2
PICTURE 4-3
PICTURE 4-4
PICTURE 4-5
PICTURE 4-6