Q-See QSDT16PCRC - Manual (Page 45)

88 89
CHAPTER 10
MOBILE SUR
VEILLANCE
OPERATING INSTRUCTIONS FOR
IPHONE/IPAD
STEP 1. Launch SuperCam. This will bring up
the Login interface.
STEP 2. Input the DVR’s IP address or DDNS
domain name, User Name and Password.
Check the “Remember Server” box to save
this setting. The User Name and Password
are the same as used on the DVR. The
default is
SYSTEM with no password.
If you are monitoring multiple devices,
previously saved login data for these devices
can be accessed using the
button on
the right.
Button Function Button Function
Playback Playback recorded files Image Image view
Log Log record Server List Device list
Live Live view Settings Software settings
Information Device information view Help Software help center
Logoff Logoff and return to login
interface
Main Menu
This window contains the function buttons needed to access and control your system.
Clicking on the help icon will list the functions as
well as how to use them. They are also defined
below:
PICTURE 10-22
PICTURE 10-23
Live View Interface
You can access the different viewing functions of the DVR in a similar manner to the controls
on the DVR itself.
Button Function Button Function
Switch channels Switches to PTZ interface
Snap picture Record
Close the video of the current
channel
Switch to 4-image view
Switch to single image view Zoom In/Focus In/Iris Open
Move the dome horizontally
and vertically. The center
square stops the movement.
Zoom Out/Focus Out/Iris Close
Preset Select the preset point
Group Set the cruise line Speed Rotate speed of the PTZ
H-Reverse Inverts PTZ control (up is down) V-Reverse Inverts PTZ control (left is right)
PICTURE 10-24 PICTURE 10-25
PICTURE 10-26 PICTURE 10-27