Q-See QSDT16PCRC - Manual (Page 5)

8 9
FEATURES AND SPECIFICATIONS
The QSDT8PCRC, QSDT8PCDP and QSDT16PCRP 8- and 16-Channel cards allow you
to add surveillance capabilities to your computer. They use a H.264 hardware compression
format which provides maximum file storage with the least amount of signal loss possible.
Monitor and record up to four channels in CIF resolution with synchronous audio and video
compression and transmission. Remotely monitor your system through your network, over the
Internet or using select mobile devices.
The first chapters will cover the installation of your card as well as any connections you may
wish to make. Later chapters will guide you through the installation of the SuperDVR 6.3
software which supports these cards along with how to operate the hardware and software
together.
Please make sure you operate the products strictly in accordance with applicable laws along
with following the guidance of this manual to maintain the stability of your digital surveillance
system.
This product offers the following features:
Motion detection mode
Motion detection areas are adjustable with a maximum 16 areas for each channel. Users can
also set motion detection sensitivity for each channel. The system begins to record only when
motion is detected on the channel and after motion stops it will stop recording after a certain
time period, which is adjustable by users.
Sensor alarm record mode
The system has an external alarm dongle which enables the system to support alarm input
and output.
Recycling record mode
Users can set recording storage sequence for hard drive partitions. The recording storage will
automatically switch to the next partition when the current one is full. If all the partitions are full
and recycling record mode is enabled, the oldest recorded data will be covered by new data.
Users can also set hard drive minimum storage alarm. Then once the present storage space
is less than the minimum storage and recycling record mode is not enabled, recording will
automatically stop.
P.T.Z control function
Supports many protocols: PelcoD, PelcoP, DSCP, DH-SD, Lilian, Minking, Neon, Star, VIDO,
and VISCA. Users can control multiple speed domes and integrative cameras, including pan,
tilt, zoom, focus and iris adjustment for P.T.Z devices. Supports preset points and auto scan.
User management
Different users have different rights, user names and passwords, to ensure system security.
Multi-channel display
Supports different multi-channel display modes, full screen display and auto dwell display.
Also:
n One PC can fit 1, 2 or 4 cards of the same model to control up to 32 channels total
n Supports 320x240, 704x480 (NTSC), 352x288, 704x576 (PAL) standard resolutions.
n Image color is adjustable for each channel, including contrast, brightness, hue and
saturation.
n H.264 compression format greatly reduces HDD usage.
n Powerful video playback functions, including pause, stop, fast-forward, single-frame play
and image capture.
n Supports advanced search mode. Users can search by date/time, camera, record mode,
and random combination of the three methods.
n Supports recorded file backup, delete by date/time, camera.
n Conveniently extend system functions through software upgrades.
n Supports multiple languages, including English, German, Spanish, Portuguese, Chinese
(Traditional), and other customized languages.
n CPU and storage resource saving by advanced technology
n Remote Surveillance and P.T.Z control through LAN, Intranet, and Internet.
n Supports alarm pre-record.
n Supports buzzer, e-mail alarm out.
n Can greatly decrease fragmented files while using NTFS partition.
n User-friendly graphical user interface.
INTRODUCTION CHAPTER 1