Description, 1 introduction, 2 purpose of equipment – Northern Airborne Technology AA36-100 User Manual
Page 9: 3 features
 
SM58 Rev. 4.00
AA36-100 Digital ICS Tie Line Adapter Manual
Section 1.0 Description
1.1 Introduction
This manual contains information on the AA36-100 Digital ICS Tie Line Adapter. 
Information in this section consists of purpose of equipment, features and specifications, 
and unit nomenclature. 
1.2
Purpose of Equipment
The AA36-100 will allow any NAT audio intercom product with an ICS tie line or 
SuperNAT tie line to be interfaced to other proprietary bi-directional and uni-directional 
ICS tie lines. 
Typically, the AA36-100 is used to add NAT intercom/audio systems to an existing 
system that is not manufactured by NAT. 
The AA36-100 can be set to work in a number of installation configurations. The typical 
application would have an NAT ICS tie line (or SuperNAT tie line) being interfaced to 
another ‘universal’ bi-directional tie line (e.g. dB Systems, Gemelli, Andrea, etc). 
Alternatively, the NAT tie line can be interfaced with the ‘universal’ uni-directional tie line 
(e.g. mic and phones). 
1.3
Features
The AA36-100 is designed to be easy to install and set up.
The AA36-100 accepts intercom bi-directional audio from the NAT standard ICS tie line 
(340 mVrms into 2 kOhms), and can accommodate up to three NAT loads in parallel. In 
Nat Super tie mode (1.2 Vrms into 2 kOhms), up to 3 Nat Super tie loads are allowed. 
At installation or service, the following functions can be adjusted to suit the user: 
• the universal microphone output levels (but not impedances) 
• the universal bi-directional ICS tie line output levels and impedances 
• the attenuation of the analog audio signal arriving on the universal ICS tie line or 
microphone input
• the attenuation of the analog audio signal arriving on the NAT ICS tie line 
• the output level of the NAT bi-directional ICS tie line 
• the universal bi-directional tie line can be configured to one of 4 possible proprietary 
tie lines
 
On power up, a burst of white noise is generated on each bi-directional ICS tie line, 
along with a short tie line identification message. 
Nov 14, 2003
Page 1-1
ENG-FORM: 800-0106.DOT 
 
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.