Northern Airborne Technology 251 User Manual

Page 21

Advertising
background image

251-xxx

Environmental Qualification Form

Rev: 1.00

Jul 28, 2009

Page 2 of 2

ENG-FORM: 521-0102.DOT

CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.

Conditions

Section

Description of Conducted Tests

Salt spray

14.0

Category X, no test performed

Magnetic effect

15.0

Class Z

Power input

16.0

Categories B and Z

Equipment met requirements for Emergency
Electrical System Operation per DO-160C
subparagraph 16.5.2.1 b (3)

Voltage spike

17.0

Category A

Audio frequency conducted
susceptibility

18.0

Category A

Induced signal susceptibility

19.0

Category A

Radio frequency susceptibility

20.0

Change No. 3

Category T

Emission of radio frequency energy

21.0

Category Z

Lightning induced transient
susceptibility

22.0

Change No. 2

Category XXC2

Lightning direct effect

23.0

Category X, no test performed

Icing

24.0

Category X, no test performed


REMARKS
Model 251-[ ] was qualified to the environmental test requirements of RTCA DO-160C by similarity to
Models 250-[ ] and 700-[ ].

For Model 250-[ ]:
-Tests of DO-160C, Sections 4.0 (paragraphs 4.5.1, 4.5.2, & 4.5.3), 5.0, 16.0, and 18.0 were conducted at
dB Systems, Inc. in Redmond, Washington.
-Tests of DO-160C, Sections 4.0 (paragraphs 4.6.2 & 4.6.3) and 20.5 (radiated susc.) were conducted at
Sundstrand Data Control Inc. in Redmond, Washington.
-Tests of DO-160C, Sections 4.0 (paragraph 4.6.1), 7.0, 8.0, 15.0, 17.0, 19.0, 20.4 (conducted susc.), 21.0,

and 22.0 were conducted at Eldec Corporation in Lynnwood, Washington.

For Model 700-[ ]:
-Tests of DO-160C, Sections 4.0 (paragraphs 4.5.1, 4.5.2 & 4.5.3), 5.0, 16.0 (except subparagraph 16.5.2.3

b), and 18.0 were conducted at dB Systems, Inc. in Redmond, Washington.

-Tests of DO-160C, Sections 4.0 (paragraphs 4.6.1, 4.6.2 & 4.6.3), 7.0, 8.0, 15.0, 16.0 (subparagraph

16.5.2.3b),17.0, 19.0, 20.0, 21.0 and 22.0 were conducted at Sundstrand Data Control, Inc. in Redmond,
Washington.

- Tests of DO-160C, Section 6.0, were conducted at Eldec Corporation and meet requirements based on
similarity to Models 207 and 407.

End of Environmental Qualification Form

Advertising