Daewoo DSC-3270E - Manual (Page 7)

5
SWITCHING THE SET ON AND OFF
Switching On
•
Switch the set on with the MAIN POWER (ON/OFF) button.
The INDICATOR will illuminate in Red.
That means the set is on stand-by mode.
•
Press PR UP or DOWN button on the front of set or POWER button( ) or
PR UP/DOWN button or one of the NUMBER button (0..9) on the remote
controller.
The set will be switched on and then the INDICATOR will be changed in
Green from Red.
Switching Off
• Press POWER button( ) on the remote controller to return the set to its
stand-by mode.
• If you don't use the set for extended periods of time, turn it off with MAIN
POWER (ON/OFF) button .
The MENU button ( ) on the remote controller is used to call up the Main
menu and also to return to either the Main menu or a previous menu.
You can call up the Main menu by pressing and holding down the TV/AV
(
) button on the front of the set during 3 seconds
The PR UP / DOWN buttons on the remote controller or on the front of the set
are used to move the selection bar up or down the menus, change data.
The Volume ( ) UP button on the remote controller or on the front of the
set are used to call up sub-menus, adjust levels.
• Press the Menu button to call up the Main menu.
•
Move the selection bar to the Language with UP or DOWN button.
•
Press the VOLUME UP button.
Then the languages will be displayed.
•
Press the UP/DOWN button to choose the language you want .
• Press the MENU button to return to Main Menu .
•
Call up the Install menu from the Main menu.
•
Place the selection bar on Auto setup and press the RIGHT button.
Then the country names will be displayed.
•
Place the selection bar on the country you require with UP/DOWN button.
ON SCREEN DISPLAY MENU
LANGUAGE SELECTION
AUTOMATIC TUNING THE TV CHANNELS
Menu
Sound
Timer
Language
Install
Picture
Position Access
Return M
Install
Manual Tune
Fine Tune
Edit
Tilt
Auto Setup
Position Start
Return M
Deutschland
France
Italia
Sverige
Switzerland
Nederland
Ireland
España
East Europe
Others
Great Britain