OpenEye Gen6 N-Series Hardware Manual - Manual (Page 19)

32521AA 19
HARD DRIVE ARRAY (N2 AND N4 ONLY)
Hard drives in the N2 and N4 recorders are arranged bottom to top in the HDD cage. A minimum of
one and a maximum of sixteen hard drives may be installed in the hard drive cage. The N4 is shipped
with the hard drives in a separate box. To insert the drives, follow these instructions. The drives must be
inserted in order, 1-16 (depending on how many drives you purchased). The drive trays are marked with
the number of their port. See the diagram for the order of the hard drive ports on the N2 and N4.
Inserting a Hard Drive
1. Pull the blue button on the drive tray to release the latch.
1. Slide the drive tray into the drive cage.
2. Close the latch until it clicks, locking the drive tray in place.
N2 Drive Order
N4 Drive Order
1 2
1
3
5
2
4
6
12