OpenEye OE-C7163 - Manual (Page 45)

46
Tampering and Network Failure Detection
Tampering Alarm – Turn the Tampering Alarm On, Off, or On By Schedule.
Tampering Duration – Designate the amount of time (in seconds) that tampering must
occur in order for a Tampering Alarm to activate.
Triggered Action
–
Designate the actions that will occur upon a Tampering Alarm
activating.
Network Failure Detection – Turn the Network Failure Detection On, Off, or On By
Schedule.
Detection Type – Designate the IP Address that will be tested and how often (in minutes).
Triggered Action
–
Designate the actions that will occur upon Network Failure Detection
activation.