Draytek 2910 - Manual (Page 152)

Vigor2910 Series User’s Guide 146
As depicted in the above application scenario, the Virtual TA client can make an outgoing
call or accept an incoming call to/from a peer FAX machine or ISDN TA, etc.
Before describing the configuration of Virtual TA in the Vigor routers, please heed the
following limitations.
z
The Virtual TA client only supports Microsoft
TM
Windows 98/SE/2000/XP platforms.
z
The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in FAX
engine.
z
One ISDN BRI interface has two B channels. The maximum number of active clients is
also 2.
z Before you configure the Virtual TA, you must set the correct country code in ISDN
Setup.
Virtual TA Server Enable: Select it to activate the server.
Disable: Select it to deactivate the server. All Virtual TA
applications will be terminated.
Virtual TA User Profiles Username - Enter the username of a specific client.
Password - Enter the password of a specific client.
MSN 1/2/3 - MSN stands for Multiple Subscriber Number. It
means you can apply to more than one ISDN lines number over
a single subscribed line. Note that the service must be acquired
from your telecom. Specify the MSN numbers for a specific
client. If you have no MSN services, leave this field blank.
Active - Check it to enable the client to access the server.