OpenEye CM-135 - Manual (Page 15)


Main Menu - CAMERA ID
Camera ID setup (default setting OFF)
Select CAMERA ID on the SETUP menu.
Use the joystick (LEFT, RIGHT) to set CAMERA ID to ON  .
Press the joystick to open ID SETUP.
Use the joystick to change the character. The camera name
can be up to 63 characters.
Select C and press the joystick to clear the ID.
Select  and press the joystick to exit the ID setup mode.
POSITION setup
Select POSITION  press the joystick.
Move the camera name using UP, DOWN, LEFT, RIGHT.
Press the joystick to confirm the camera name location.
1.
2.
3.
4.
5.
6.
1.
2.
3.