Datalogic Scanning Win-Net Vehicle PWR Cab HRS 3500-16P-CV - Manual

WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
WIN-NET USB PWR CAB
(HRS 3500-16P-CV)
To connect the WIN-NET USB PWR cable follow the sequence:
1.
connect the cable to the Host PC and the USB Device;
2. connect the power supply to the WIN-NET USB cable.
To disconnect the WIN-NET USB PWR cable follow the sequence:
1.
disconnect the power supply from the WIN-NET USB cable;
2. disconnect the cable from the Host PC and the USB Device.
822000670
Host PC
USB Device
Power Supply
Host PC
USB Device
Power Supply
Host PC
USB Device
Power Supply
Host PC
USB Device
Power Supply
Host PC
USB Device
Power Supply
Host PC
USB Device
Power Supply