Dual BTV30 - Manual (Page 4)

®
BTV30 BLUETOOTH SPEAKERPHONE
®
3
OPERATION
Gently lift the LCD flap to turn the unit on. The LCD will
illuminate, and "HELLO" will appear momentarily in
the display.
Note: After 60 seconds of no activity, the LCD
illumination will turn off and the unit will enter power
save mode. Press any button to exit power save mode.
Power On
Gently close the LCD flap to turn the unit off.
Power Off
Bluetooth Pairing
1) To pair a Bluetooth enabled mobile phone to the BTV30, press for three
seconds. "PAIRING" will appear in the display.
2) The unit will broadcast a signal for 60 seconds. To manually exit pairing mode
during this time, press momentarily.
3) Complete the pairing from the Bluetooth menu of the phone by searching
for new devices. Please refer to the phone's instruction manual for further
information on Bluetooth pairing and connections.
4) The phone will display the unit model name (BTV30) and prompt to begin pairing.
5) When prompted, enter the four-digit PIN number (0000).
When the unit is turned on, it will automatically reconnect to the phone to which
it was last connected. If the phone does not connect automatically, press to
reconnect. Some phones may not support this feature.
Automatic Connection
Disconnect a phone from the BTV30 by using the Bluetooth menu of the phone.
Please refer to the phone's instruction manual for further information.
Disconnecting