Paso Sound P202MKV - Manual (Page 26)

IMPORTANT SAFETY PRECAUTIONS
26
TASCAM 202 MK V
5 − Reference and specifications
Track System 4-track, 2-channel stereo
Heads Construction Record/playback head x 1 (each deck)
Erase head x 1 (each deck)
Tape Speed 4.8 cm/sec
9.5 cm/sec (high-speed dubbing mode)
Pitch Control 12%
Fast Winding Time approximately 160 sec (C-60 tape)
Motor DC servo motor (capstan)
Wow and Flutter 0.25% (WRMS)
Frequency Response (Overall)
Metal tape (Type IV, playback only) 30 Hz-19 kHz
Chrome tape (Type II) 30 Hz-18 kHz
Normal tape (Type I) 30 Hz-17 kHz
Signal to Noise Ratio (Overall) 58 dB (Dolby NR OFF, nominal recording level)
69 dB (Dolby NR ON, CCIR-ARM)
Line Input (RCA jack) 100 mV (input impedance 50k ohms)
Mic Input (mono 1/4” Phone jack) 0.38 mV (input impedance 200k ohms)
Line Output (RCA jack) 0.46 V (load impedance 50k ohms or more)
Headphones Output (stereo 1/4” Phone jack) 1 mW/32 ohms
Power Requirements
U.S.A./Canada 120 V AC, 60 Hz
U.K./Europe 230 V AC, 50 Hz
Australia 240 V AC, 50 Hz
Power Consumption 22 W (U.S.A./Canada)
22 W (U.K./Europe)
22 W (Australia)
Dimensions (including protruding parts) 482 (W) x 138.5 (H) x 286 (D) mm (18.95” x 5.45” x 11.26”)
Weight 4.0 kg (8.8 lb)
Specifications
Dimensional drawing
To improve the product, specifications and external appearance may be changed without notification. •
As a result of product improvements, illustrations and other depictions in the owner’s manual may differ in part •
from the actual product.