Permasteel PG-4030000L - Manual (Page 9)

7
ONLY USE THE HOSE ASSEMBLY PROVIDED WITH THIS GRILL.
PLEASE USE THE REGULATOR SUPPLIED BY LOCAL DEALER.
This is a limitative gas configured grill. Do not attempt to use a natural gas supply unless
the grill has been reconfigured for natural gas use.
The installation of this appliance must conform with local codes.
ƒ
REGULATOR AND HOSE REQUIREMENTS:
The regulator used with your grill must be CE approved, and conform to local codes.
Also the hose connect to the tank must be CE approved and conform to local codes.
The length of the hose shall be no excess 1.5m.
ƒ TANK REQUIREMENTS:
The tank used with your grill must meet the following requirements:
1) Measurement: must conform to local codes.
2) Maximum Capacity: must conform to local codes.
3) Gas type:
I
3+
: Butane 28~30mbar
Propane 37mbar
I
3B/P(30)
: LPG 28~30mbar
4) Constructed and marked in accordance with the specification for limitative gas.
5) Be arranged for vapor withdrawal.
6) Includes a collar to protect the tank valve.
ƒ
FOR YOUR SAFETY
Ensure that the black plastic grommets of the regulator provided are in place and
that the hose does not come into contact with the heat shield or the grill head.
ƒ CONNECT THE REGULATOR TO THE TANK
VERY IMPORTANT:
- THE REGULATOR SHALL NOT BE IN A LOCATION THAT WILL ATTAIN A
TEMPERATURE ABOVE 140℉（60℃）.
- THE REGULATOR SHALL INCORPORATE A PRESSURE RELIEF VALVE
OR OVERPRESSURE DEVICE.
- THE INLET OF THE PRESSURE REGULATOR SHALL BE FITTED TO
CONNECT TO THE TYPE I CONNECTION OF THE TANK VALVE.
GAS CONNECTION