Philco PHHB 6601 - Manual (Page 6)

4 Revison 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
PART 2: HOW TO USE YOUR BLENDER
Remove all packaging materials. Attach the lower removable part to the motor unit.
Prior to initial use, it is necessary to thoroughly wash the device with hot water, using washing-up liquid,
followed by rinsing it with drinking water.
During washing and cleaning, you may submerge in water only the removable part 5. Do not submerge in
water or any other liquid the motor unit of the blender.
Assembling the immersion blender
1) Push the bottom removable part on to the motor unit (4) until it clicks in. A click indicates that the motor
unit is secured.
2) Now the immersion blender is ready for use. Connect the power plug of the appliance to a power socket.
NOTE:
Do not run the appliance for longer than 1 minute.
When assembling/disassembling the immersion blender, always make sure that the appliance is turned off
and disconnected from the power socket.