POLAR Stride Sensor BT Smart - Manual (Page 7)

Calibrate the Stride Sensor
Calibration of the stride sensor improves the
accuracy of speed, pace, distance and stride
length measurements. It is recommended that
you calibrate the stride sensor before using it
for the first time, if there are significant
changes in your running style, or if the position
of the stride sensor on the shoe is dramatically
changed (e.g. if you have new shoes or if you
switch the sensor from your right shoe to your
left one). The calibration should be done at the
speed you normally run.
Calibration is done via the receiving device. See
the user guidance material of the receiving
device or mobile application for instructions.
Service
During the two-year guarantee/warranty period
we recommend that you have service, other than
battery replacement, done by an authorized
Polar Service Center only. The warranty does not
cover damage or consequential damage caused
by service not authorized by Polar Electro. For
contact information and all Polar Service Center
addresses, visit www.polar.com/support and
country-specific websites.
E N G L I S H 5