Posiflex PG-200/2D - Manual (Page 16)

Prefix/Suffix Values
A prefix and/or one or two suffixes can be appended to scan data for use in
data editing. To set a value for a prefix or suffix, scan a prefix or suffix bar
code below, then scan a four-digit number (i.e., four barcodes, Numeric Bar
Codes) that corresponds to that value. To correct an error or change a selection,
scan Cancel barcode.
Note: To use Prefix/Suffix values, first set the Scan Data Transmission Format.
For non-SSI hosts, when using host commands to set the prefix or suffix, set
the key category parameter to 1, then set the 3-digit decimal value.
Scan Prefix
Scan Suffix 1
Scan Suffix 2
Scan Data Transmission Format
To set values for the prefix and/or suffix, see Prefix/Suffix Values.
< Data As ls >
<DATA> <SUFFIX 1>
<DATA> <SUFFIX 2>
<DATA> <SUFFIX 1> <SUFFIX
2>
16