Posiflex PD-2605UE - Manual (Page 8)

Part 8
APPENDIX
APPLICABLE COMMANDS (FOR PD-309)
EPSON COMMAND MODE (POWER ON DEFAULT):
NAME HEX CODES FUNCTION
BS <08> Move Cursor Left
HT <09> Move Cursor Right
LF <0A> Move Cursor Down
HOM <0B> Move Cursor To Home Position
CLR <0C> Clear Display Screen
CR <0D> Move Cursor To Left Most Position
CAN <18> Clear Cursor Line
ESC = <1B><3D><n>
Select Peripheral Device / Command Mode
n=1 pass through (should not be used)
n=2, 3 (not required)
n=4 switch to PST command mode
ESC @ <1B><40> Initialize Display
ESC t <1B><74><n>
Disable / Enable Euro Dollar Sign
n = 0, 19
US MD1 <1F><01> Specify Overwrite Mode
US MD2 <1F><02> Specify Vertical Scroll Mode
US MD3 <1F><03> Specify Horizontal Scroll Mode
US LF <1F><0A> Move Cursor Up
US CR <1F><0D> Move Cursor To Right Most Position
US $
<1F><24><n><
m>
Move Cursor To Specified Position
n = 1 ~ 20
m = 1, 2
US @ <1F><40> Show Version
US B <1F><42> Move Cursor To Bottom Position
US C <1F><43><n> Cursor On / Off, n = 1, 0
US E <1F><45><n>
Blink Display Screen
n = 0 ~ 255
PST COMMAND MODE:
HEX CODES FUNCTION
<01> Set Pass Through Flag (should not be used)
<06> <N
1
> <N
2
> Change Leading Code
<14> <01> Wraparound Mode (Default)
<14> <02> Vertical Scroll Mode
<14> <03> Insert Mode