DeLonghi ESAM6600 - Manual (Page 21)

C o l l e c t i o n 20
• Press the OK button to reset the factory default values.
• Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or to change other parameters.
• The appliance is now reset to the factory default settings and the READY message is displayed.
17.8 Beep ON/OFF (activates and deactivates the beep)
•
Press the P button, then press the button (corresponding to the symbol flashing on the display)
repeatedly until the menu arrow is on:
beep on
• Press the button (corresponding to the SET symbol flashing on the display) and the appliance will dis-
play " ".
• Press the OK button to turn the beep off.
• Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode
or to change other parameters.
• The appliance is now set not to emit any beeps and displays the message READY
18 CHANGING THE LANGUAGE
To change the language, press the OK button for at least 5 seconds until the appliance displays the installation
message in various languages. Select the required language and press OK for 3 seconds (as described in sec-
tion 4.1).