REMKO ATY 260 - Manual (Page 17)

Problem display by blinker code
Display Cause What to do ?
88 blinks Loss of power for 3 minutes Turn off and on again
E1 blinks Communication error Display regulation Contact dealer
E2 blinks Air circulation sensor on interior unit is defective / triggered Contact dealer
E3 blinks Antifreeze sensor interior unit defective / triggered Contact dealer
E4 blinks Evaporator fan motor speed too low / defective Contact dealer
E5 blinks No cooling / heating output after approx. 30 min. Contact dealer
E6 blinks Low voltage fuse triggered Contact dealer
E7 blinks Communication error Contact dealer
17