REMKO GSG-4 - Manual (Page 3)

3
The REMKO GSG-4 control unit is used in combination with an addi-
tional external temperature control (e.g. REMKO ATR-1 or ATR-3) to
connect and control a max. of 4 heaters.
The modes heating, ventilating and resetting the electronic control sys-
tem, can be controlled separately for the individual GPA-C with this unit.
The modes unit operation and burner malfunction are displayed sepa-
rately for each unit by the respective control light.
The control unit is supplied with all accessories to connect a maximum of
4 units. However, the required thermostat control is not included.
Our guarantee becomes null and void if the unit is used improperly
or if modifications are made to the supplied unit.
G
Read these instructions carefully before putting the control unit
into operation and then using it.
G
Description of Device
Unit 1 Unit 2 Unit 3 Unit 4
Operating switch
Operating light
Malfunction light
Reset button