Remko gpm, Safety information – REMKO GPM 15 User Manual

Page 4

Advertising
background image

4

REMKO GPM

Safety information

The units were subjected to
extensive material, function and
quality inspections and tests prior
to delivery. However, the units
may constitute a hazard if used by
untrained personnel, improperly or
not for the intended purpose.
The following information must be
observed:

■

The units must only be

operated by persons who have
been instructed in the operation
of the units

■

In the event of faults that affect

safe operation of the units, they
must be switched off

■

The units must be installed and

operated so that the discharging
hot air has no damaging
effects on the environment or
equipment

■

Do not expose the units to the

effects of weather (rain, sun,
etc.)

■

Do not touch the units with

moist or wet parts of the body,
e.g. hands

■

Protect the units from splashing

water or other liquids

■

Do not use gas pipes for

grounding electrical equipment

■

Do not touch hot parts of the

units such as the chimney pipe

■

Do not moving parts of the units

The units must always be operated in compliance with the applicable
local building and fire protection regulations and regulations of the
employers‘ liability insurance associations.

■

Never insert foreign objects in

the units

■

The units must only be mounted

on constructions or ceilings
of flame retardant materials
designed to take the weight

■

The units must only be fastened

at the points provided at the
factory

■

The units must not be installed

and operated in locations
exposed to fire hazards
and potentially explosive
atmospheres

■

The units must be installed

outside traffic zones, e.g. of
cranes. A protective zone of 1 m
distance must be maintained

■

The air inlets including grilles

must be kept free of dirt and
loose objects at all times

■

The units must not be exposed

to a direct jet of water

■

The units must be tested at least

once a year by a specialist

■

Safety devices must not be

overridden or blocked!

■

Before carrying out

maintenance or repairs, the gas
supply must be shut-off and the
unit disconnected in all poles
from the mains supply.
(Unscrew fuse or switch off
local main/emergency switch)

Precautions if there is a smell
of gas

1. Immediately switch off the unit.

2. Close the gas shut-off valve(s).

3. Warn all persons potentially at

risk.

4. Open windows and doors.

5. Do not operate electrical

devices such as light switches or
electrical plug contacts.

6. If the room in which there is a

smell of gas cannot be entered,
immediately call the fire brigade,
police and if necessary the
responsible gas supply company.

The units are intended
exclusively for industrial and
commercial use. They are not
intended for domestic heating
or similar..

NOTE

ATTENTION

Installation, adjustments and
maintenance must only be
carried out by authorised
specialists.

The safety devices must not be
overridden or blocked during
operation.

ATTENTION

Advertising
This manual is related to the following products: