REMKO ETS300 - Manual (Page 5)

5
Warranty
The warranty conditions are listed
in the "General terms and conditions".
Please contact your direct contractual
partner about this first instance.
Environmental
protection and recycling
Disposing of packaging
All products are packed for transport
in environmentally friendly materials.
Make a valuable contribution to reducing
waste and sustaining raw materials.
Only dispose of packaging at approved
collection points.
Disposing of the components
The manufacturing process for the units
is subject to continuous quality
control. Only high-grade materials
are processed, the majority of which are
recyclable. Help protect the environment
by only disposing of the components
in accordance with local regulations
and in an environmentally safe manner,
e.g. through authorised disposal and
recycling specialists or at collection points.
Intended use
The tanks are used for the storage of hot
water.
Any different or additional use is a non-
intended use. The manufacturer/supplier
assumes no liability for damages arising
from a non-intended use. The user bears
the sole risk in such cases.
Intended use also includes working
in accordance with the operating and
installation instructions and complying
with the maintenance requirements.
Description
The tanks are used for the storage of hot
water.
The tank volume can be adapted to your
particular needs by connecting several
tanks to form batteries.
The tank is enamelled and has a double-
wound, smooth-pipe heat exchanger
with an especially large heat exchanger
surface area of 2.6 m
2 .
In the inside tank a magnesium false
anode is installed in accordance with
DIN 4753.
The insulation of the hot water storage
tank ETS 300 is comprised of a 50 mm
thick PUR insulation (CFC, HCFC
and HFC free).
The tank is encased in a foil casing
(delivered separately for transport
protection).
A blank flange cover D180 is installed
for the retrofitting of a finned tube heat
exchanger or flange heating cartridge
(legionella protection).