Remotec ZXT-120 V1.1 - Manual (Page 11)

11
Listening Mode Change (default mode is FLiRS)
ZXT‐120 can be configured as either “Frequently Listening Routing
Slaves” (FLiRS) or “Always Listening” node after exclusion process.
FLiRS node type is targeted for battery operated applications and it
will enter sleep mode frequently in order to conserve battery
consumption.
Always Listening node type is targeted for the needs of required a fast
response application.
Important:
It is not allowed to changing ZXT‐120 operation mode without
exclusion process (do not change ZXT‐120 operation mode while ZXT‐
120 is included in a network).
How to switch ZXT‐120 listening mode from “Always Listening＂ to
“FLiRS＂ (or vice verse)
Step Setup Key
LED Indication Status
on ZXT‐120
1
Press and hold the PROG button on
the ZXT‐120 for around 4 seconds
• LED stay off
2
Release the button and then press
the PROG button 3 times within 2
seconds
• LED flashes twice
then stay off
(ZXT‐120 set in FLiRS
mode)
OR
• LED flashes four
times then stay off
(ZXT‐120 set in
Always Listening
mode)
IR Code Selection
ZXT‐120 is with built‐in IR AC code library, user may select the IR code
using Configuration Command Class.
Step Setup Key
LED Indication Status
on ZXT‐120