D-Link DIR-412 - Manual (Page 51)

47 D-Link DIR-412 User Manual
Section 3 - Configuration
Network Filters
Select Turn MAC Filtering Off, Allow MAC addresses
listed below, or Deny MAC addresses listed below from
the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to
the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and click
<< to copy the MAC Address from the DHCP client.
Select a schedule for when the Network Filter will be
enabled. The user can click the New Schedule button
to bring up the “Schedule Webpage” to configure a new
schedule.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.