Rena IR7C - Manual (Page 6)

UNPACKING:
WARNING: REMOVE FOAM SHIPPING INSERTS PRIOR TO OPERATION
All dryers are shipped with foam inserts over the ends of the infrared lamps. These inserts are
located under the raceway covers. This foam insert is only for shipping and MUST be removed
prior to operation.
Instructions:
ƒ Make sure the power cord is disconnected from the dryer.
ƒ On each end of the dryer, remove the 4 screws that secure the raceway covers.
ƒ Remove the raceway covers.
ƒ Remove the packaging material (foam shipping inserts) on both sides of the dryer.
ƒ Re-attach the raceway covers using the four screws.
ƒ Save the packing material for possible future use.
IR7C_Operations_11-3-09 6