RLE LD5200 V.2.3 - Manual (Page 15)

rletech.com LD5200 User Guide 15
C
H A P T E R
C HAPTER 0
I
NSTALLATION
2.1 Prepare for Installation
To install the LD5200, you’ll need the following supplies:
Included with the LD5200
♦ Wall mount kit
♦ Cross-over cable (blue with yellow ends)
♦ 15 foot (4.57m) leader cable
♦ End-of-line terminator (EOL)
Available from RLE, sold separately
♦ SeaHawk Sensing Cable, up to 10,000 feet (3048m) of cable with a resistance of 2.800
ohms per foot, or up to 7,000 feet (2134m) of cable with a resistance of 4.000 ohms per
foot.
♦ Non-sensing cable
♦ J-Clips
Information Required
Consult with your IT administrator to determine the following network settings for the
LD5200:
♦ IP address
♦ Subnet mask
♦ Default gateway