Satel ETHM-1 - Manual (Page 22)

SATEL 2014-04-02
Appendix 2 - kind of long description
Kind of long description:
0 - no addictional description
1 - partition/zone|expander|keypad
2 - partition/user
3 - partition keypad/user (partition keypad address in PPPPPR) (not LCD keypad, but LED partition keypad, e.g. INT-S)
4 - zone|expander|keypad
5 - partition
6 - keypad/user
7 - user
8 - expander reader head
9 - telephone
10 - output of telephone relay type
11 - partition/data bus
12 - partition/output|expander (partition not important for main panel outputs)
13 - partition/output|expander (partition not important for outputs)
14 - telephone in PPPPP/user (telephone: 0 - unknown, 1.. - phone number)
15 - partition/timer
30 - beginning of TCP/IP address (keypad address in PPPPP)
31 - 3rd and 4th bytes of TCP/IP address
32 - partition/zone or ABAX output
Appendix 3 - kind of short description
Kind of short description (just another kind of event description) - 2 bytes: MrIRoDnT gtwmkues of the following bit meaning:
s - partition
e - zone/expander/LCD-keypad
u - user
k - expander in RPPPPP
m - LCD-keypad in PPPPP
w - output/expander, partition only for expandera
t - timer
g - proximity card reader
T - telephone
n - number (RAM error)
D - data bus (0=DTM, 1=DT1, 2=DT2, 129..128+IL_EXPAND=expander)
o - call back (0='SERV', 1='SERV=', 2='USER', 3='USER=', 4='ETHM-modem', 5='ETHM-RS')
R - telephone relay
I - TCP/IP event (2 rekords !!!)
r - ABAX input/output, partition only for input
M - monitoring
- 22 -