Dual XHD6430 - Manual (Page 9)

9
XHD6430 OPERATION
Analog and Digital Tuning
Seek Tuning
Manual Tuning
Scan Tuning
Band
Storing and Recalling
Station Presets
The following tuning functions will access both analog and
digital stations. Refer to the HD SEEK mode section on page
10 for instructions on tuning to only digital stations.
Press TUNE
nn
or TUNE
ll
for more than one second
to seek the next strong station.
When an HD Radio station is selected, an HD Radio logo will
begin to flash on the display. In about five seconds, HD or
HD1 will illuminate after the radio frequency.
• If "HD" appears, the radio station is broadcasting a higher
quality sound. No additional stations are available.
• If "HD1" appears, additional multicast channels (HD2
and/or HD3) are available. Press TUNE
ll
to tune to
other available multicast channels.
Press TUNE
nn
or TUNE
ll
momentarily to move radio
frequency up or down one step at a time. Press and hold to
advance quickly.
Press SCAN momentarily to preview strong stations on the
current band, pausing for five seconds at each. Press SCAN
again to cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands. Up to six presets can be programmed for each
band.
Up to 18 FM stations and 12 AM stations can be stored.
including HD Radio stations and multicast channels. To
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than two
seconds. When stored, the preset number will appear in
the display. The station can be recalled by pressing the
corresponding preset button.
HD Radio™ AM/FM Tuner Operation