Scotsman RS160 - Manual (Page 3)

FOR THE INSTALLER: Installation Of Loose Shipped Parts
Several components are packed inside the hopper:
••
Drip tray and grill
••
2 drain hoses
••
Several hose clamps
••
Several barbed hose fittings
••
Fluorescent tube
••
Lever (for lever models)
Remove them and set them aside for installation.
Ice lever/Ice Chute/Fluorescent Tube
1. Lift up and pull out to remove upper front panel.
2. Slide out ice chute mounting panel.
3. Insert the ice lever in to the valve panel through
the slot as shown.
4. Swing the ice lever through from right to left and
let it hang freely.
5. Twist the fluorescent tube into the sockets.
6. Replace ice chute mounting panel.
7. Insert clear ice chute into the panel and twist
clockwise 1/3 turn.
8. Replace the upper front panel.
Install Lever
In Slot
ICE CHUTE
MOUNTING
PANEL
ICE CHUTE
RS160 TOP VIEW
(For Reference)
RS160 and RS220
June 1995
Page 3