Document Outline

• Section 1 – Notices
• 5
• Warranty
• 6
• Copyright Notice
• 6
• E & OE
• 6
• Declaration of Conformity
• 7
• Section 2 - General Guidance Notes
• 9
• Safety
• 10
• Safe Application of Test Equipment
• 11
• Maintenance
• 12
• Summary of Safety Information
• 13
• Section 3 - Introducing the CLARE G2000
• 15
• Front Panel Controls
• 16
• Rear Panel Connections
• 19
• Accessories
• 20
• Section 4 – Operating Procedures
• 23
• Instrument Set-Up
• 24
• Test Procedure A – Basic Earthed \(Class I\) P
• 27
• Test Procedure B – Basic Double Insulated \(Clas
• 31
• Test Procedure C – Earthed \(Class I\) Product
• 35
• Test Procedure D – Double Insulated \(Class II\
• 39
• Section 1
• Notices
• Limited Warranty & Limitation of Liability
• CLARE Instruments Limited guarantees this product for a period of 1 year. The period of warranty will come into effect on the day of delivery.
• ??Copyright 1999
• E&OE
• Section 2
• General Guidance Notes
  • SAFETY
    • • • • • • KEEP THE TEST AREA CLEAN AND TIDY
      • SUMMARY OF SAFETY INFORMATION
• Section 3
• Introducing the CLARE G2000
  • • • • • • • FIG.1 Facia Controls & Indicators
        • Note
          • • • FIG.3 Rear Panel
              • FIG.2 Accessories
• Section 4
• Operating Procedures
• Test Procedure A
  • • • • Visual Inspection
        • Before applying any of the electrical tests, first inspect the product to ensure that all parts, including wiring, are mechanically sound and free form obvious defects or damage. Check also that cable restraints and switches, if fitted, are secure and fu
        • Continuity/Polarity Test
        • Flash Tests – LN-E and L-N
• Test Procedure B
  • • • • Before applying any of the electrical tests, first inspect the product to ensure that all parts, including wiring, are mechanically sound and free form obvious defects or damage. Check also that cable restraints and switches, if fitted, are secure and fu
        • Continuity/Polarity Test
        • Flash Tests – LN-Outer Surfaces and L-N
          • • • DO NOT TOUCH, HOLD OR COME INTO BODILY CONTACT WITH THE ITEM WHEN FLASH TESTING
• Test Procedure C
  • • • • Visual Inspection
        • Before applying any of the electrical tests, first inspect the product to ensure that all parts, including wiring, are mechanically sound and free form obvious defects or damage. Check also that cable restraints and switches, if fitted, are secure and fu
        • Earth Continuity Test
        • Flash Test – LN-E
        • WARNING
• Test Procedure D
  • • • • Note – It is not advisable to apply a L-N Flash t
        • WARNING