Seiko 7S36 - Manual (Page 5)

9
English
English
8
MON 16 MON 16
1. Unlock the crown by turning it counterclockwise.
2. Slowly turn the crown clockwise to wind the mainspring.
3. Continue to turn the crown until the mainspring is sufficiently wound.
The second hand will start moving.
4. Lock the crown by turning it clockwise while pressing it.
l Hour, minute & second hands
l Date
l Day
FEATURES
200 METER WATER RESISTANCE
l Suitable for scuba diving
ROTATING BEZEL
l Elapsed time measurement during
diving (up to 60 minutes)
SCREW DOWN CROWN
TIME/CALENDAR
l Hour, minute & second hands
l Date
4R15/4R35/7S35
HOW TO START THE WATCH (4R15/4R16/7S26/7S35/7S36)
l To initially start your watch:
Swing it from side to side in a horizontal arc for about 30 seconds.
This is an automatic mechanical watch.
* If the watch is worn on the wrist, the mainspring will be wound automatically through normal
wrist movement.
* If the watch is used without being wound up sufficiently, gain or loss of the watch may result. To
avoid this, wear the watch for more than 8 hours a day.
4R16/4R36/7S26/7S36
HOW TO START THE WATCH (4R35/4R36)
l To initially start your watch:
If your watch is completely stopped, it is recommended that you manually wind
the mainspring by turning the crown.
l How to manually wind the mainspring by turning the crown
4 1
2 3
* The winding operation for 4R35 and 4R36 are the same.
This watch is an automatic watch equipped with a manual winding mechanism.
SECOND HAND HALT MECHANISM (4R35/4R36)