Sensoray 627 - Manual (Page 4)

Sensoray Model 627 Instruction Manual 5
1. Introduction
Sensoray’s Model 627 CompactPCI to PCI Hot Swappable Bus Adapter allows testing CompactPCI
(CPCI) boards using the desktop PC. It offers significant cost and time savings: there is no need for
expensive CompactPCI enclosure and processor, and the boards under test could be replaced without
having to power down the system (with the use of Sensoray’s HotSwap software utility that comes with
the adapter).
2. System Requirements
The Model 627 adapter requires one PCI, 32-bit, 33 MHz slot. Sensoray’s HotSwap utility requires
Windows 95, 2000, XP or Windows NT, and approximately 4 MB of hard drive space.
3. Specifications
Parameter Specification
Bus PCI, 32-bit, 33 MHz
Control Single pushbutton illuminated switch
Mounting Standard PC bracket
CompactPCI board mounting Guide rails and a custom bracket
accommodating standard CompactPCI
ejector handle
Dimensions 6½ x 4¾ x ¾ inches (not including the
CompactPCI bracket)
Operating temperature 0 °C to 70°C
Power
switch