Sierra Video RCP-1616 - Manual (Page 39)

ASPEN 1616 AND 3232 RCP CONTROL PANELS
29
Salvo
Salvos are programmed via the web page (see the Salvo Setup Section).
To fire a Salvo;
 Select the FUNC button. The button turns YELLOW
 Select the SALVO button. This button will illuminate BLUE.
 Buttons One (1) to Sixteen (16) (1 to 32 on the RCP-3232) in the INPUT section
illuminate BLUE to indicate the registers available for choice. Only buttons that
are stored as a salvo register are illuminated.
 Select any of the illuminated buttons. The selected button will blink CYAN.
 The TAKE button begins to blink red
 Select
TAKE
• The salvo is executed
• The FUNC button turns off
• The front panel returns to normal operation mode
Note:
On the Aspen RCP-3232, the SALVO button is output button 25. On the Aspen RCP-1616, the
SALVO button is output button 9.