Dynacord promatrix system – Dynacord DPP 4004 User Manual
Page 4
1.)
covered mains switch
2.)
mains LED-indicator (off, when the mains switch is not engaged)
3.)
battery LED-indicator (off, when the mains switch is not engaged)
4.)
mains input connector
5.)
mains fuse (input connector)
6.)
mains output connector
7.)
mains fuse (output connector)
8.)
ground-lift switch
9.)
DC-output via flat-connector: +24 V / 4 A (DPP4004) or +24 V / 12 A (DPP4012) direct / GROUND
10.)
remote control connector – for pin-assignment refer to diagram 1
11a.) battery fuse – input – negative pole
11b.) battery fuse – input – positive pole
12.)
battery flat-connector – input – negative pole
13.)
battery flat-connector – input – +24 VDC
14.)
DC-output via flat-connector: +24 V / 4 A (DPP4004) or +24 V / 12 A (DPP4012) switched
15.)
DC-output via flat-connector – negative pole
16.)
DC-output via flat-connector for the PROMATRIX SYSTEM; persistent power supply
17.)
ventilation louvres – airflow in
18.)
ventilation louvres – airflow out
DYNACORD
PROMATRIX SYSTEM
14