Sim2 Crystal - Manual (Page 39)

39 Using the projector
System menu
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 21 for details.
Splash Screen
Allows you to select which logo screen will display during projector
start-up. You can choose Brand logo screen, Blue screen or Black
screen.
My Screen
Captures and stores the projected picture as My Screen. See
"Creating your own startup screen" on page 33 for details.
Projector Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
"Choosing a location" on page 11 for
details.
Auto Off
Prevents unnecessary projection when no signal is detected for a
long time. See "Setting Auto Off" on page 42 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 3 hours.
Background Color
Allows you to choose the color of the background screen that will
be displayed when there is no input source detected.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last
key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Input Source
Selects an input source to be projected. See "Selecting an input
source" on page 20 for details.
Auto Source Search
Sets whether the projector searches automatically for input
sources. If the source scan is On, the projector will scan for input
sources until it acquires a signal. If the function is not activated, the
projector selects the last used input source.