Smart Avi RK-DVX200 - Manual (Page 6)

6
www.smartavi.com
RK-DVX200
COMPUTERS
REMOTE RACK
Up to 225 ft
over STP
1. Power off all devices.
2. Connect DVI-D sources (computers) to the DVI-D ports of the RK-DVX200
transmitter.
3. Connect the RK-DVX200 transmitter to the RK-DVX200 receiver with one STP
(Sheilded Twisted Pair) cable per channel (up to 16).
4. Connect up to 16 DVI displays (or optional DVI-D outputs) to the ports on the rear
of the RK-DVX200 receiver.
5. Connect the power to the RK-DVX200 transmitter and the RK-DVX200 receiver.
6. Power on the computers and displays.
Installation Diagram Three - Rack to Rack