Product - installation diagram, Introduction, Features – Smart Avi VNET+2P User Manual
Page 2: Applications, Installation, Switching between ports
Introduction
The VNET+2P is a cross-platform WUXGA switch
capable of sharing one WUXGA Monitor between
two computers, PC or Mac. View four computers with
WUXGA on a single screen, saving money and desktop
space.
Features
•
Supports Mac, PC, Linux and Sun
•
Supports High Resolution 1920x1200 60Hz
WUXGA
•
Supports USB keyboard and mouse
•
Balanced stereo audio output
•
Front panel tactile switch with LED indicator
•
Supports Auto-scan mode for simple
discovery
Applications
•
Home Theater Integration
•
Digital Signage Deployment
•
Information Kiosks/Displays
•
Film/Recording Studios
In the medical or industrial field, where it may not be
practical (or safe) to have one or more CPUs in the
general vicinity, SmartAVI’s VNET Switch Series is the
perfect solution, allowing for either PC or Mac signals
to be extended from computer to the display.
Another practical use for one of our VNET Switch would
be for media recording studios, where soundproofing
and space issues come into play. Using a VNET Switch
eliminates the inherent “hum” of a powered CPU and
gives you the freedom of using your keyboard, mouse
and monitor without having to find room for the
computer itself in the same workspace.
Product - Installation Diagram
Installation
1.
Turn off all computers and the display.
2.
Connect the VGA extension cables, USB cables, and audio cables (not included) to the computers and to the “IN”
ports on the VNET+2P.
3.
Connect the display to the “OUT” VGA connector on the VNET+2P.
4.
Connect USB mouse and keyboard to the “OUT” USB connector on the VNET+2P.
5.
Connect speakers to the “OUT” audio connector on the VNET+2P.
6.
Connect the power cord and power on the VNET+2P.
7.
Power on the computers and the display.
8.
Use the front panel buttons to select the desired input port.
Switching Between Ports
Front Panel Control
To switch ports using the front panel, press either the up or down
button to cycle through the available ports. The selected port number
will be indicated on the LED display.
VNET+2P
Mac
PC