Configuring load segments, Controlling load segments through the display – Dell H952N User Manual
Page 49
49
Operation
|
Configuring Load Segments
Load segments are sets of receptacles that can be controlled by the Dell UPS Management Software,
the Dell Network Management Card, or through the LCD display, providing an orderly shutdown and
startup of your equipment. For example, during a power outage, you can keep key pieces of equipment
running while you turn off other equipment. This feature allows you to save battery power.
Each Dell Online Rack model has two configurable load segments. See “Identifying the UPS Rear
Panels” on page 15 for the load segment locations.
To control the load segments with power management software, see your power management software
manual for details (refer to the Software CD or www.dell.com for the latest information).
Controlling Load Segments Through the Display
To control the load segments through the display:
1
Press the
button for one second to go to the main menu selection and scroll down to the
Control menu using the button.
2
Press the
button to enter the Control menu.
3
Use the button to scroll to Load Segments.
4
Press the
button.
The current setting for the option flashes when selected.
5
Select the desired load segment using the and buttons.
6
Set the desired load segment ON or OFF using the
button.
7
Press the
button to confirm.
8
Set the other load segment if applicable.