Smithco AER 8 Aerifier (sn 001-012) Operator Manual - Manual (Page 8)

6
Maintenance
SET UP
HYDRAULIC HOSE KIT
If you purchased a Aer8-003 Hose Kit with your base Aer-8 Aerator it will come un-installed.
Quick Couplers from hose to tow vehicle are not included.
1. You will have to supply your own quick couplers to attach hydraulic
hoses to your tow vehicle.
2. Hydraulic fittings and hoses should be attached to the cylinder. If
not, connect one end of hoses to the cylinder.
3. Route the hoses through the trough below the ballast tank, secure
in the hose clamp on the top of the tongue.
4. Connect opposite end to the tow vehicle with quick couplers (not
provided).