Selecting the sound source, Charging the built-in battery – SoundFreaq SFQ-04 User Manual

Page 8

Advertising
background image

.7.

Selecting the Sound Source

This system enables you to access two sound sources - AUX and Bluetooth.

Press the SOURCE button repeatedly at Soundfreaq Remote App in Bluetooth mode or by
connecting AUX audio cable to the unit/pairing a Bluetooth device with the unit simply to enjoy
either sound source.

Check the built-in Lithium coin battery
capacity:

Hold the (play/pause) button on the unit to
check the battery capacity by the charging
indicator.

Charging the Built-in Battery

The Sound Kick has a built-in Lithium coin
battery to give you portable power when not
using the AC adapter. When the adapter is
plugged in, the unit will charge. During
charging, the charging indicator next to the DC
IN
jack will be solid red. When fully charged, it
will be turn green. When operating the unit in
battery mode, a flashing red indicator means
the battery is below 10%.

You must charge this unit for 12 hours before
using for the first time.

Notes:

The battery cannot be replaced by the user.

It takes about 3 hours to charge the battery
from empty to full.

Do not dispose of unit in fire; battery may

explode or leak.

Type: Lithium-Ion Rechargeable Battery
Model No: LC18650
Rated Voltage: 3.7 V (* 1)
Capacity: 2200 mAh

WARNING

!There is a danger of explosion if

the battery is incorrectly replaced. Replace it
only with the same or equivalent type. Do not
expose it to excessive heat such as sunshine,
fire, etc.

Charging indicator

9V 2A

Status Color Capacity

Solid Green 90%

Blinking (3 times) Green 90 - 70%

Blinking (1 times) Green 70 - 50%

Blinking (1 times) Red 50 - 30%

Blinking (3 times) Red 30 - 10%

Solid Red less than10%

Advertising