SP Controls DA-8 CatLinc - Manual

WARRANTY
SP Controls warrants all CatLinc™ products and accessories against defects in materials and
workmanship for a period of three years from the date of purchase.
Although SP Controls thoroughly tested and reviewed this documentation, there is no warran-
ty, express or implied, with respect to quality, merchantability, or fitness for a particular pur-
pose. Therefore, the CatLinc™ and accessories are provided "as-is" and the purchaser
assumes the entire risk as to quality and performance.
There are no obligations or liabilities on the part of the SP Controls Corporation for conse-
quential damages arising out of or in conjunction with the use or performance of these prod-
ucts or other indirect damages with respect to loss of profit, revenue, or cost of removal
and/or replacement. Some states do not allow the exclusion or limitation of incidental or con-
sequential damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights that vary from state to
state. SP Controls' maximum liability shall not exceed the price paid by the user.
All implied warranties, including warranties for merchantability and/or fitness, are limited in
duration to three (3) years from the date of purchase. Proof of purchase must be provided
with any claim.
SP Controls, Inc.
930 Linden Ave.
S. San Francisco, CA 94080
www.spcontrols.com
SP Controls, Inc. www.spcontrols.com SP Controls, Inc.
CatLinc™ DA-8
User's Guide
Caution:
This equipment does not allow the distribution of computer signals through Ethernet networking
hubs or switches. Do not connect this device to a network hub or other communications equipment.
COPYRIGHT
CatLinc™ is a trademark of SP Controls, Inc.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without express written permission of SP
Controls, Inc.
© 2007-9 SP Controls, Inc. All rights reserved.