Gm coil over conversion valving adjustment – Spohn Q-GMP-A6467 User Manual
Page 3
Tech Line: (952) 985-5675 Fax (952) 985-5679
21730 Hanover Ave. Lakeville, MN 55044
www.QA1.net
•GM COIL OVER CONVERSION VALVING ADJUSTMENT •
•
These QA1 shocks have 24 damping settings. There are 8 clicks per revolution of the knob. The knob has 3
complete revolutions. The knob set fully counter clockwise is the softest setting - start your adjusting from that
point. Recommended base settings to begin testing with are as follows:
•
For RGMP series Drag race shocks, 0-6 clicks.
•
For GMP shocks, 4-10 clicks for a Nice Ride characteristic.
•
For Double Adjustable Drag Race setting, 18-24 clicks compression and 0-4 clicks rebound.
•
For Double Adjustable Nice Ride characteristics 4-10 clicks compression and rebound.
NOTE: DO NOT FORCE THE ADJUSTER KNOB. DO NOT USE PLIERS OR ANY OTHER TOOLS ON
THE PISTON ROD OR THE ADJUSTER KNOB. DO NOT EXCEED 24 CLICKS UNDER ANY
CIRCUMSTANCES. THIS COULD DAMAGE THE IDLER PIN AND CAUSE THE SHOCK NOT TO
ADJUST. THIS WILL VOID ALL WARRANTIES. DO NOT USE THE SHOCK ABSORBER AS A DROOP
LIMITER. SEVERE DAMAGE TO THE SHOCK COULD OCCUR AND VOID ALL WARRANTIES.