Model 770 – Studio Technologies 770 User Manual
Page 40
Advertising
Issue 1, October 1997
Model 770 User Guide
Page 40
Studio Technologies, Inc.
Model 770
Referring to the Model 32 or Model 33
schematic diagram, observe the 200 ohm
resistor that is connected between circuit
common and the counterclockwise con-
nection of each potentiometer. This resis-
tor prevents full attenuation. By replacing
this 200 ohm resistor with a 0 ohm
resistor or jumper strap, full attenuation
can be achieved.
Advertising
See also other documents in the category Studio Technologies Equipment:
- 34 (8 pages)
- 2A 2015 (43 pages)
- 41 2013 (25 pages)
- 2A 2013 (41 pages)
- 41 2007 (25 pages)
- 75 (56 pages)
- 41 2004 (22 pages)
- 42A 2013 (25 pages)
- 42A 2008 (25 pages)
- 45DC (23 pages)
- 45A (31 pages)
- 45DR (23 pages)
- 46A (33 pages)
- 47A (33 pages)
- 72 (9 pages)
- 69A 2005 (49 pages)
- 69A 2001 (48 pages)
- 760-03 V.4.15 (55 pages)
- 760-03 V.4.15 (53 pages)
- 760-03 V.4.15 (53 pages)
- M77-00151 (45 pages)
- M76-00151 (37 pages)
- 76DA V.4.00 (51 pages)
- 76DA V.4.02 (53 pages)
- 76DA V.3.00 (47 pages)
- 76DBA V.3.00 (53 pages)
- 780-02 V.4.15 (51 pages)
- 210 2004 (37 pages)
- 212 2013 (37 pages)
- 212 2006 (37 pages)
- 210 2008 (37 pages)
- 214 (33 pages)
- 215 (31 pages)
- M212-00151 (36 pages)
- 220 2013 (43 pages)
- 220 2008 (43 pages)
- 220 2004 (42 pages)
- 230 2014 (51 pages)
- M233-01151 (47 pages)
- 230 2008 (55 pages)
- 5110 V.3.2 (17 pages)
- 240 (37 pages)
- 742A (31 pages)
- M5110-00151 (15 pages)
- 5121 (19 pages)