Q-See QSDR008RTC - Manual (Page 23)

User Manual
19
6 Slow play, Normal play, Fast Play 15 Convert AVI
7 Next Hour 16 OSD
8 Capture picture 17 Mute switch
9 Reduce window 18 Volume adjust
4 、Please refer to the below [Video on] setting procedure (System default - video for every channel is on)
5
、Refer to the below for [Audio on] setting procedure. (Setting parameter will be available after re-starting
multimedia player after [Audio on] set up.)
Setting Audio channel setting Normal video Bar Select the channel you want to playback the
audio Select the channel has audio files Apply OK.
After successfully setting the above, when you playback the current channel, you can open the channel’s
audio function at the same time as the video
5.2.6 Device Management
5.2. 5.2. 5.2. 5.2.6666.1 .1 .1 .1 HDD Management HDD Management HDD Management HDD Management
Setting Video play setting Normal video
Bar Select the channel you want to display Select
to play the video Apply OK
Options in device management include Hard drive,
External Alarm, PTZ control, Mobile Phone Monitoring, and
Motion Detection.
Click [Main Menu Device HDD] to enter [HDD
Management] menu (shown as Picture 5-30)
Picture 5-27
Picture 5-27A
Picture 5-28A Picture 5-28B
Picture 5-29