Electrical characteristics curves – Delta Electronics Delphi S36SE User Manual
Page 3
DS_S36SE05003_07312008
3
ELECTRICAL CHARACTERISTICS CURVES
Figure 1:
Efficiency vs. load current for minimum, nominal, and
maximum input voltage at 25°C.
Figure 2:
Power dissipation vs. load current for minimum, nominal,
and maximum input voltage at 25°C.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
15
20
25
30
35
40
45
50
55
60
65
70
75
INPUT VOLTAGE(V)
IN
PUT
CURRENT
(A)
Figure 3:
Typical full load input characteristics at room
temperature.
Figure 4:
(For negative remote on/off logic) Turn-on transient at
full rated load current (5 ms/div). Vin=48V. Top Trace: Vout, 2V/div;
Bottom Trace: ON/OFF input, 5V/div.
Figure 5:
(For negative remote on/off logic) Turn-on transient at
zero load current (5 ms/div). Vin=48V. Top Trace: Vout, 2V/div,
Bottom Trace: ON/OFF input, 5V/div.
Figure 6:
(For positive remote on/off logic) Turn-on transient at full
rated load current (5 ms/div). Vin=48V. Top Trace: Vout, 2V/div;
Bottom Trace: ON/OFF input, 5V/div.