Teac AX-501 - Manual (Page 13)

13
EN
Names and functions of parts (remote control)
a Input selection buttons
Use these to select the input source.
b METER Illumination adjustment button
Press this to change the meter illumination and opera-
tion settings. Press repeatedly to cycle through the
illumination and operation settings in the following
order.
High brightness, meters function
Medium brightness, meters function
Low brightness, meters function
Unlit, meters function
Unlit, meters do not function
c MUTE button
Press this to temporarily silence sound output. Press it
again to restore sound output at the previous level.
d VOLUME (+, −) buttons
Use to adjust the volume.
o The RC-1309 remote control supplied with the
AX-501 can control both AX-501 and PD-501HR units.
This manual explains how to use it with the AX-501.
o When both the main unit and the remote control
have buttons with the same functions, this manual
explains how to use either of them. The correspond-
ing buttons can be used in the same manner.
b
c
d
a