Troubleshooting, Specifications, Troubleshooting specifications – Teac AI-3000 User Manual

Page 11

Advertising
background image

Troubleshooting

Specifications

Amplifier Section

Power output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 W + 200 W (8 Ω)

300 W + 300 W (4 Ω)

Frequency response . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz - 30 kHz (-0.5 dB)
Signal noise ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 dB (A-weighted)
Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01 % or less
Input sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280 mV/47 kΩ

General

Power supply

Europe model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
USA/Canada model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz

Power consumption (nominal)

Europe model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .570 W
USA/Canada model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380 W

Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . .435 x 230 x 520 mm
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.3 kg
Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5˚C - +35˚C
Operating humidity. . . . . . . . . . . . . . . . . . 5 % - 85 % (no condensation)
Storage temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10˚C - +55˚C

Accessories

Power cord x 1
Remote control x 1
AAA battery x 2
Warranty card x 1
Owner's manual x 1

Design and specifications are subject to change without notice.

o

Weight and dimensions are approximate.

o

Illustrations may differ slightly from production models.

o

11

ENGLISH

If you experience any problems with the unit, please take a moment
to look through this chart before asking for repairs. If you still have
a problem, contact your dealer or TEAC customer service/technical
support (stated on the back cover).

No power

e

Check the connection to the AC outlet. Check and make sure

the AC source is not a switched outlet and that, if it is, the switch
is turned on. Make sure there is power to the AC outlet by
plugging another item such as a lamp or fan into the outlet.

Remote control doesn't work.

e

Press the POWER switch of the main unit to turn it on.

e

If the batteries are dead, change the batteries.

e

Within the specified range of 10 m, point the remote control

directly at the unit's front panel.

e

Clear any obstacle between the remote control unit and the

main unit.

No sound

e

Check the connection to the amplifier.

e

Check the operation of the amplifier.

e

Muting is activated. Press the MUTE button. Select the correct

source.

e

Output protection has been activated. Turn off the unit,

check for possible causes (e.g. short-circuited speaker cables,
connected speakers with wrong impedance) and solve the
problem. Wait 5 minutes before turning on the power again.

Advertising