Tecfluid CU Series User Manual
Instruction manual, Ultrasonic flowmeter cu100
Advertising
Table of contents
Document Outline
- MI_CU100_index_eng_rev1
- 1. INTRODUCTION
- 2. INSTALLATION OF THE ELECTRONIC CONVERTER
- 3. CONVERTER INTERFACE
- 4. MAIN MENU
- 5. TRANSDUCERS INSTALLATION
- 5.1 Straight pipe run requirement
- 5.2 Installation with the alignment guide
- 5.3 Fastening of the tranducers
- 5.4 Entering the installation parameters of the transducers
- 5.5 Language
- 5.6 Transducer
- 5.7 Units
- 5.8 Pipe parameters
- 5.9 Liquid
- 5.10 Paths
- 5.11 Installation and distance between transducers
- 5.12 Fixing the transducers
- 5.13 Signal strength
- 5.14 Distance
- 5.15 Programs
- 6. CONVERTER PROGRAMMING
- 7. SOFTWARE VERSION
- 8. SERIAL NUMBER
- 9. DEFAULT SCREEN
- 10. MAINTENANCE
- 11. ASSOCIATED SOFTWARE WINSMETER CU
- 12. TECHNICAL CHARACTERISTICS
- 13. DIMENSIONS
- 14. TROUBLESHOOTING
- ANNEX A - Sound propagation velocity in some liquids
- ANNEX B - Sound propagation velocity in some solids
- ANNEX C - Flow rate table